Our Machinist 429A Red Seal Exam package contains 881 multiple choice questions and answers to give you the most complete exam package to help you prepare for your Inter-Provincial Red Seal Exam.

​

Machinists are used when a part needs to be produced from a material by machining or removal of material. They will use machine tools followed by engineering drawings to make, modify or repair a parts. The materials normally used are metals, plastics and wood. These parts are usually required to be manufactured within very close tolerances or specifications. This may be done by manual or CNC machining using milling machines, lathes, grinding machines, drilling machines, saws, CNC, EDM and boring machines. Machinist must also understand the different properties of metals, plastics and other composite materials.

 

You will receive all our modules emailed directly into your inbox same day so you can begin studying immediately. This allows you to open the files on any Computer,

I-Phone or Android device directly from your email inbox so you can study at your own pace anywhere at anytime without the worry and pressure of expiring limited online sessions. All modules have been developed in PDF and are printable if required.

​

Safe working practices and accident prevention are the primary importance to the health and safety of all person(s) at any or all work place environments. All person(s) including employee, employer and government, share this responsibility in order to keep everyone free of any dangers or accidents that may cause an individual(s) serious bodily harm or death. Practicing health and safety is a tremendous contribution to a safe and accident free work place environment. 

 

Sample Questions

 

1. The amount of stock removed by cylindrical grinder from the diameter of a shaft in relation to the wheel in-feed is?

a. twice the in-feed

b. equal to the in-feed

c. half the in-feed

d. one quarter the in-feed

Ans. C

 

2. Name the most accurate way used to measure axial movement in a shaft play?

a. vernier calliper

b. micrometer

c. dial indicator.

d. depth gauge

Ans. C

 

3. A machinist would use which of the following to indicate an angled surface and make that surface parallel to a surface plate?

a. V-block and indicator

b. machinist vise

c. sine plate

d. angle plate and plate protractor

Ans. C

 

4. Chips can be made manageable and safe to the operator by using?

a. A piece of wood to break them into smaller chips

b. Feeds and depths of cut that contribute to chip breaking and by using chip breakers on tools

c. A hook tool to remove them as soon as they are produced and by wearing gloves to protect your hands.

d. Large back rake and side rake angles on tools to contribute to the smooth flow of an even uniform chip

Ans. B

 

5. Large internal threads are often made on the lathe with single point tools because?

a. it is faster than by tapping

b. cleaner smoother threads are produced

c. it is the only way the threads can be produced

d. various thread forms can be made and they are concentric to the axis of the work

Ans. D

 

 

 

Get the most complete exam information package today, easily & affordably from         Red Seal Exam Trades Group and pass your Inter-Provincial Red Seal Exam with confidence!