Our Carpenter 403A Red Seal exam package contains 807 multiple choice questions and answers giving you the most complete exam package to help you prepare for the

Inter-Provincial Red Seal Exam. 

​

The Carpenter is responsible for constructing and framing along with maintaining residences and buildings. This includes building items such as stairs, making repairs to the internal and external structure and ensuring buildings are safe. Assemble and fasten materials to make framework or props, using hand tools, power tools, mark cutting lines on materials and marking gauge. Diagnosing problems quickly and accurately requires critical and analytical thinking ability. Carpenters will work within new home building and renovations, building developers and government sectors.

 

You will receive all our modules emailed directly into your inbox same day so you can begin studying immediately. This allows you to open the files on any Computer,

I-Phone or Android device directly from your email inbox so you can study at your own pace anywhere at anytime without the worry and pressure of expiring limited online sessions. All modules have been developed in PDF and are printable if required.

 

Safe working practices and accident prevention are the primary importance to the health and safety of all person(s) at any or all work place environments. All person(s) including employee and employer share this responsibility in order to keep everyone free of any dangers or accidents that may cause an individual(s) serious bodily harm or death. Practicing health and safety is a tremendous contribution to a safe and accident free work place environment.

 

Sample Questions

 

1. Wall plates and bearing plates should be installed at which stage of wall construction?

a. After the scaffolding is removed. 

b. After the wall is set.

c. When the steel members are being installed.

d. When the wall is being built.

Ans. D

 

2. Which of the following defects may appear on a concrete slab is cast in the basement after a hardwood floor has been laid on the first floor?

a. oxidation of nails in the sub-floor.

b. creation of mould between the hardwood floor and the sub-floor.

c. discoloration of the hardwood floor.

d. exaggerated swelling of the wood.

Ans. D

 

3. Which of the following is the correct material to be used when doing the horizontal siding of an exterior wall, after installing the air barrier?

a. various trims.

b. furring.

c. starter strip.

d. horizontal wallboards.

Ans. B

 

4. What procedure should be used so the inverted stringers can be easily attached when pouring wing walls that will house a closed concrete stair?

a. Set threaded inserts into concrete in specified locations for attachment.

b.Set ready rod ties in concrete in specified locations for attachment.

c. Use explosive actuated tools to attach inverted stringers because there is less chance for error of attachment locations.

d. Set taper ties into concrete in specified locations for attachment because they can be removed and filled with grout later

Ans. A

 

5. What else should be done in the snap tie system of forming, the wedges should be placed at a slight angle to increase their bearing on the structural forming members?

a. They should be hammered snug and tacked with two duplex nails to prevent dislodging.

b. The wedges should be hammered as tight as possible and tacked with two duplex nails to prevent dislodging.

c. They should be nailed with two duplex nails and the large hole up to prevent dislodging and make stripping easier.

d. They should be nailed with two duplex nails and the large hole down to prevent dislodging and make stripping easier.

Ans. A

 

 

 

 

Get the most complete exam information package today, easily & affordably from          Red Seal Exam Trades Group and pass your Inter-Provincial Red Seal Exam with confidence!